Tips and Tools to Tint Taillights of Your car

1
Select your tint
Tinting your tail lights with film tint is great. With the film tint, the light can through the tinting to restricts the light that comes back in. Depending on the effect you wish to achieve,you can choose the color and type you need, like regular black, yellow, red, gunsmoke or optic blue. You can also buy pre-cut film that fit certain car models online like 3M and LLumar
2
Clean up the surface of the taillight
Before starting, it is necessary to completely clean your car's tail lights. By using window cleaner, microfiber cloth that won't leave any lint, tinting sprayer and some tinting tools like tinting squeegee, you can easily to get rid of any debris or watermarks.

3
Cut the tint to a rough size
You can cut the film tint to an approximate size with precision knife like window tinting Rotary Cutter for Film with Safety Lock which you can buy from TintingTool.com. Depending on the size of the vinyl sheets, you can cut the size accurately.
4
Remove the film tint from its protective sheet
Peel the film tint from the protective plastic sheet. Then spray either some soapy water or a solution of 85% water and 15% rubbing alcohol in a car window tinting sprayer on the adhesive side. This will prevent the film from sticking before you have properly aligned it on the taillight.
5
Place the tint over the taillight
You may need to stretch it to fit the shape of the light. If the light is very curved, you will find it difficult to fit. Just use your hands work out any creases or use tinting heat gun or dryer to make it more malleable. Just don't hold the heat source too close to the film or apply heat for too long, as this may weaken or shrivel it.
6
Use a squeegee to remove any air bubbles
 Use a vinyl hard card squeegee or handled squeegee sold on TintingTool.com to push any excess water or air bubbles from the center outwards. You can also continue to use the heat gun or hair dryer at this point to help you to smooth the film.
7
Cut away the excess film
Use a precision stainless holding knife to cut around the taillight, leaving a little extra film around the perimeter. Be careful when doing this, so you don't accidentally cut any of the film covering the taillight.
8
Tuck in the edges
The final step is to use the heat gun and the vinyl hard car squeegee or shor handle stainless scratch to stretch and tuck the edges of the film around the edges of the taillight, out of sight. Once the film sets it will hold its position.

Tools you need to tint the taillight of your car include: tinting sprayer, tinting short or long handle stainless scratch, tinting hard card and handled squeegees, tinting holding cutter and blades, as well as some cleaning products. You can buy all these tool from TintingTool.com with fast delivery and love price.